K-m-konig-meyer CMP-VOIP60 Manuel d'utilisateur télécharger pdf

CMP-VOIP60

1. Package contents

- SIP Internet Phone

- Manual

- UTP Cable

- Power Adapter

2. Hardware installation

Please install your phone as the connection chart above shows.

3. Setting up the phone

3.1 Obtaining IP address

First of all, you should obtain the IP address of the phone. After you connect the phone with your

local network, it will get an IP address automatically by DHCP (server assigned). Press MENU

button and up/down to select the ‘Network’ menu and press ENTER, then press up/down to

select the Status menu, then press ENTER.

You will see L for LAN port IP and W for WAN port IP. The default LAN port IP is 192.168.123.1.

3.2 Use the web based programming page

After getting the correct IP, open an Internet Explorer browser on the PC which is connected with

the same network as the phone (Please ask your network administrator how to set your PC).

Then put the IP address in the Web page. At the end of IP address, please add the port number

“:9999”, for example: http://192.168.123.1:9999 and press Enter. You will see the login screen.

The default account and password are

For admin user:

Account: root

Password: test

For normal user: (With this account you can not set some parameters, e.g. SIP domain)

Account: user

Password: test

3.3 Network Settings

Click the menu Network->WLAN Settings and Network->LAN Settings to set the network

parameters. Please consult your ISP or network administrator about it. DHCP is the default

network type. Your phone will get the required network parameters such as IP and subnet mask

automatically.

-1-

If your network uses static IP, you should set local IP, subnet mask, gateway IP, DNS1 and

DNS2 first. If your network uses PPPoE, you should set the PPP password first.

3.4 Set time and SNTP server

Click the menu Phone Setting->SNTP Settings to set your SNTP server and time zone.

Note: If your service provider has pre-programmed some settings such as Primary Server,

Secondary Server, Time Zone, Synchronic Time, and so on, you will not need to program these

items.

3.5 SIP Settings

After you have the IP setting completed as above, you should set following parameters which are

required to log in SIP Server: Display Name, User Name, Register Name, Register Password,

Domain Server, Proxy Server, SIP Port, RTP Port, DTMF setting.

3.6 Save Settings and Reboot

Simply click the Save button and quit the browser after the Configure OK screen appears, and

then click the Reboot button.

3.7 Normal Operation

After the phone reboots, it will show the time and the account information.

3.8 Use Keypad to set this device

Note: Before you set SIP Setting, you need to get authority in the menu Administrator->System

Authority. You should input roots password here. The input keys:

Key Name

Description

“1”, “-“, “ ”, “!”, “?”

“2”, “a”, “b”, “c”, “A”, “B”, “C”

“3”, “d”, “e”, ”f”, “D”, “E”, “F”

“4”, “g”, “h”, “I”, “G”, “H”, “I”

“5”, “j”, “k”, “l”, “J”, “K”, “L”

“6”, “m”, “n”, “o”, “M”, “N”, “O”

“7”, “p”, “q”, “r”, “s”, “P”, “Q”, “R”, ‘S”

“8”, “t”, “u”, “v”, “T”, “U”, “V”

“9”, “w”, “x”, “y”, “z”, “W”, “X”, “Y”, “Z”

“0”, “space”

“*”, “•”, “:”, “@”

Start dialing process

This is the “Menu” key to set the IP Phone

UP/DOWN

This is Up / Down key and volume setting when hook off. Incoming

calls/dial calls when ready.

FWD

Call forward

CONF

3-way conference

ENTER

This is “ENTER”, accept setting

DEL

This is “Delete”, Delete word or phone number

HOLD

This is “HOLD” function

CONTACTS

This is “CONTACTS”, Phone Book

FLASH

This is “FLASH” function

This is “RD” the same number again

SPK

This the Speaker Phone

-2-

ENGLISH

INSTRUCTIONS

1 2 3

ENGLISH 1
INSTRUCTIONS 1

Résumé du contenu

Page 1 - INSTRUCTIONS

CMP-VOIP60 1. Package contents - SIP Internet Phone - Manual - UTP Cable - Power Adapter 2. Hardware installation Please install your phone as

Page 2

4 Phone Functions 4.1 Making Calls over the Internet User can call another VoIP phone or any PSTN telephone through the Internet by simply dialling t

Page 3

5.3 Call Hold/Retrieve Operation: While on a call, press ‘HOLD’ button on the phone then the call will be on hold. You can dial the new number. To ret

Commentaires sur ces manuels

Pas de commentaire

K-m-konig-meyer CMP-VOIP60 Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Téléphones K-m-konig-meyer CMP-VOIP60. K & M - Konig & Meyer CMP-VOIP60 User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels